How To Connect Ring Doorbell? (4 Steps)

Last updated on September 2nd, 2024 at 05:18 am

Do you want to know how to connect Ring Doorbell? Yes, you can connect Ring Doorbell by yourself by following these steps. A few years ago, I remember visiting my Grandma in her cozy little house. She had always been a strong and independent woman, but as time passed, age began to take its toll.

One day, during a routine visit, she mentioned how much she missed the connection with her neighbors and friends, especially since she couldn’t easily get to the door in time when someone visited.

As I listened to her, an idea struck me. I had recently installed a Ring Doorbell at my own home, which had helped me stay connected with visitors even when I wasn’t physically at the door. Perhaps this could be the solution for Grandma too.

I decided to help her set up a Ring Doorbell at her front door. Know how to choose best Ring Doorbell here.

Come on, Let me show you how to connect Ring Doorbell.

What is a Ring Doorbell?

A Ring Doorbell is a smart video doorbell that allows you to see and interact with whoever is at your door, whether you’re at home or away. It offers a range of features including motion detection, video feed, two-way audio communication, and mobile app notifications.

The device connects to your home’s Wi-Fi network and is available in both wired and battery-powered options. With its sleek design and easy installation process, a Ring Doorbell provides a convenient and effective way to enhance the security and functionality of your home.

What You Will Need to Connect Your Ring Doorbell

To connect your Ring Doorbell, it is important to gather the necessary tools and supplies for a smooth and successful installation process. Here are the items you will need:

1. Mini level: A mini level will help ensure that your Ring Doorbell is properly aligned and straight during installation, resulting in an aesthetically pleasing look.

2. Masonry bit: If you are installing your Ring Doorbell on a brick or concrete surface, a masonry bit will be needed to create holes for the screws or anchors.

3. Plastic anchors: These anchors are essential for providing additional support and stability when mounting your Ring Doorbell onto a surface.

4. Security screws: To prevent tampering and unauthorized removal of your Ring Doorbell, security screws are included. These screws require a specific tool to loosen and remove them.

5. Tape: Using tape can help hold the doorbell wires in place and prevent them from being accidentally disconnected or pulled during the installation process.

By gathering these essential items, you will have everything you need to ensure a secure and stable connection for your Ring Doorbell. Follow the provided installation instructions carefully and enjoy the convenience and security that your Ring Doorbell provides.

4 Steps To Follows On How To Connect Ring Doorbell?

Step 1: Prepare the Area for Installation

Before you begin the installation process for your Ring Doorbell, it is important to properly prepare the area to ensure a seamless and secure connection. Start by gathering the necessary tools such as a mini level, masonry bit, plastic anchors, and security screws.

These tools will assist you in mounting the doorbell securely onto the surface of your choice, whether it be wood, concrete, or brick. Additionally, consider using tape to hold the doorbell wires in place and prevent any accidental disconnection during installation.

By taking these simple steps to prepare the area, you will be ready to move forward with the installation process and enjoy the added security and convenience that the Ring Doorbell provides.

Gather Necessary Tools and Supplies

To successfully connect a Ring Doorbell, you will need to gather a few necessary tools and supplies. The specific contents may vary depending on the model of the doorbell being installed. Here are the essential items you will need:

1. Charging Cable: Most Ring Doorbells come with an internal battery that requires periodic charging. Ensure you have the appropriate charging cable on hand.

2. Screws: The doorbell usually comes with screws for attaching it to the wall or doorframe. Check the installation instructions for the recommended screw size and type.

3. Screwdriver: A screwdriver, typically a Phillips or flathead, will be necessary for loosening or tightening screws during the installation process.

4. Fittings: Depending on the specific doorbell model and the type of installation you choose, you may need additional fittings such as plastic anchors or angled mounts.

5. Miscellaneous Tools: It’s always a good idea to have a few miscellaneous tools on hand, such as a level, masonry bit (if drilling into brick or concrete), and a mini level for ensuring a straight installation.

By gathering these necessary tools and supplies before you begin the installation process, you’ll be prepared to smoothly connect your Ring Doorbell. Remember to consult the specific model’s installation instructions for any additional tools or items that may be required.

Test the Voltage of Your Existing Doorbell

To ensure a successful installation of your Ring Doorbell, it’s important to first test the voltage of your existing doorbell. Follow these simple steps to determine the voltage using a voltage tester:

1. Turn on Circuit Breaker: Locate the circuit breaker switch that controls the power to your doorbell. Make sure it is turned on to restore power and activate the doorbell.

2. Prepare Voltage Tester: Grab your voltage tester and ensure it is functioning properly. Check the user manual for specific instructions on how to use your particular model.

3. Safety Measures: Safety is paramount during this process. Wear gloves and protective eyewear and make sure to handle the wires and tester with caution.

4. Testing Procedure: With the power restored, carefully place the probes of the voltage tester on the screw terminals or wires of the existing doorbell. Follow the manufacturer’s instructions on the tester to accurately measure the voltage.

5. Voltage Results: Once the probes are in place, read the voltage displayed on the tester. Ensure it falls within the specified range recommended by Ring for your particular doorbell model.

Testing the voltage of your existing doorbell is an essential step in the installation process. It helps ensure compatibility and prevents any potential damage to your Ring Doorbell. By following these simple steps, you’ll be able to determine the voltage and proceed with confidence.

Remove Existing Doorbell Components

Before installing the Ring Doorbell, it is necessary to remove the components of the existing doorbell. Here are the steps to safely remove the old doorbell:

1. Remove the Doorbell Faceplate: Carefully unscrew the faceplate of the old doorbell. Use a screwdriver to loosen and remove the screws holding the faceplate in place. Set the faceplate aside for disposal or future use.

2. Detach the Power Wires: Locate the power wires that connect the old doorbell to your home’s electrical system. These wires may be color-coded, with one typically being white and the other black or red. Before proceeding, ensure that the circuit breaker for the doorbell is turned off to avoid any electrical mishaps. Using a screwdriver, gently unscrew the terminals or clamps holding the power wires in place. Take note of which wire is connected to which terminal.

3. Remove the Old Doorbell: Once the power wires are detached, you can safely remove the old doorbell from the wall. Use a screwdriver to unscrew the mounting screws securing the doorbell to the wall or door frame. Carefully lift the doorbell unit away from the mounting bracket, ensuring not to damage any nearby wires or other components in the process.

By following these simple steps, you can easily remove the existing doorbell components without causing any damage. This prepares the way for a smooth installation of your new Ring Doorbell.

Mark New Screw Holes and Level Tool

To properly install your Ring Doorbell, you will need to mark new screw holes and use a level tool to ensure it is positioned correctly. Follow these simple steps for a successful installation.

1. Position the Doorbell: Hold the Ring Doorbell against the desired installation spot, whether it’s on the wall or door frame. Use a mini level tool to ensure the doorbell is perfectly straight. Adjust the position until the bubble in the level tool is centered.

2. Mark the New Screw Holes: With the doorbell held in place, take a pencil and mark the locations for the new screw holes. These marks will serve as your guide during the installation process. Double-check that the doorbell is still level before proceeding.

3. Preparing for Screw Installation: Once the screw holes are marked, set the level tool aside. Take note of the screw size recommended in the installation instructions provided with your Ring Doorbell. You may need to use a specific drill bit or masonry bit depending on the surface you are working with.

4. Secure the Doorbell: With the screw holes marked, use a power drill and the appropriate drill bit to create pilot holes for the screws. This will prevent any damage to the wall or door frame during installation. Then, line up the doorbell with the marked screw holes and attach it securely to the wall or door frame using the provided screws.

By following these steps, you can confidently mark new screw holes and use the level tool to ensure your Ring Doorbell is properly installed and functioning as intended. Enjoy the added security and convenience that your Ring Doorbell brings to your home.

Step 2: Install the Backplate of the Ring Doorbell

Once you have positioned the Ring Doorbell and marked the screw holes, it’s time to install the backplate. This backplate serves as the mounting base for your doorbell and provides stability and support.

Start by removing the security screws on the back of the doorbell using the provided screwdriver or security screwdriver.

Next, align the backplate with the screw holes you marked earlier and hold it firmly against the wall or door frame. Make sure it is level and straight before proceeding. Once you are satisfied with the placement, use the provided screws to secure the backplate in place.

Ensure the screws are tightened securely, but be careful not to overtighten and damage the backplate or surface. Double-check that the backplate is still level and straight before moving on to the next step.

Installing the backplate properly is crucial as it forms the foundation for the rest of the installation process. By following these simple steps, you are well on your way to connecting your Ring Doorbell and enhancing your home security.

Attach Plastic Anchors in Wall

To securely mount the Ring Doorbell on a wall, you may need to attach plastic anchors. Here are the steps to follow:

1. Begin by marking the locations for the new screw holes using a pencil. Make sure they align with the pre-drilled holes on the mounting bracket.

2. If your installation surface is hard, such as brick or stucco, you will need to drill holes using a masonry bit. Choose an appropriate bit size based on the diameter of the plastic anchors you have. Be sure to wear safety glasses and gloves while drilling.

3. Once the holes are drilled, gently tap the small, white plastic anchors into the holes until they are flush with the surface. These anchors provide extra support and stability for mounting the doorbell.

4. If your installation surface is wood or vinyl siding, you can skip this step, as the plastic anchors are not required.

5. Finally, position the mounting bracket on top of the plastic anchors. Align the bracket with the screw holes and use the provided screws to secure it in place. Tighten the screws until they are snug, but be careful not to overtighten and strip the holes or damage the anchors.

By following these simple steps, you can attach plastic anchors in the wall to securely mount your Ring Doorbell.

Secure Backplate with Security Screws

To securely attach the backplate of your Ring doorbell, you will need to use the provided security screws and the security screwdriver included in the package. Follow these steps to ensure a secure installation:

1. Start by positioning the backplate to the desired location on your wall or door frame. Ensure that it is level using a mini level tool.

2. Once you have found the perfect spot, mark the screw hole locations on the surface using a pencil. Make sure the holes align with the backplate.

3. Now, take one of the security screws provided and insert it into the designated hole on the backplate. Use the security screwdriver to tighten the screw until it is snug. Repeat this step for all the remaining screw holes.

4. It’s important to note that the security screws are designed to prevent the backplate from being easily removed or tampered with, providing extra security for your Ring doorbell.

By securely attaching the backplate with the security screws, you can have peace of mind knowing that your Ring doorbell is in place and properly installed. This step is crucial to ensure the stability and functionality of your video doorbell, giving you the added security you need for your home.

Step 3: Connect Wires to the Backplate of the Ring Doorbell

After securely attaching the backplate to the desired location, it’s time to connect the existing doorbell wires to the backplate of your Ring doorbell.

This step ensures that your Ring doorbell receives power and functions properly. Start by removing the cover on the back of the Ring doorbell to reveal the wiring terminals.

Next, locate your existing doorbell wires that are typically housed in a conduit or junction box. Gently remove the wire nuts or electrical tape that are covering the wire ends.

Connect the wires to the corresponding terminals on the backplate, with the positive wire (typically red) connected to the positive terminal and the negative wire (usually white or black) connected to the negative terminal. Securely tighten the screws on the terminals to ensure a secure connection.

It is important to handle the wires with care and ensure that they are properly insulated and free from any damage.

Once the wires are securely connected, replace the cover on the back of the Ring doorbell, making sure it is flush and tightly sealed. Congratulations! Your Ring doorbell is now ready for the next step of the installation process.

Identify Wires from Existing System or Install New Ones if Necessary

When setting up a Ring doorbell, it is important to properly identify the wires from the existing doorbell system or install new ones if needed.

Follow these steps to ensure a successful installation:

1. Identify the existing doorbell system: Start by locating your current doorbell system and switch off the power at the breaker box to prevent any accidents during installation.

2. Loosen the screws on the mounting bracket: Use a screwdriver to gently loosen the screws on the mounting bracket of the existing doorbell. This will allow you to access the wires more easily.

3. Identify the wires: Carefully examine the wires connected to the existing doorbell. Typically, there will be two wires – one for power (usually labeled “trans”) and one for the doorbell chime (usually labeled “front” or “R”).

4. Install new wires if needed: If your existing doorbell system does not have the necessary wires, installation of new wires may be required. Consult the installation instructions provided by Ring to determine the specific wiring requirements for your doorbell model.

5. Connect the wires: Once you have identified the wires, wrap the power wire around the screw labeled “trans” on the mounting bracket and the doorbell chime wire around the screw labeled “front” or “R.” Ensure that the wires do not touch each other to avoid any electrical issues.

6. Tighten the screws: Gently tighten the screws on the mounting bracket, securing the wires in place. Use a pencil to mark the locations for the new screw holes if required.

By following these steps, you can properly identify the wires from your existing doorbell system or install new ones if necessary, ensuring a successful connection of your Ring doorbell.

Connect Wires to Screw Terminals on the Backplate of the Ring Doorbell

To connect the wires to the screw terminals on the backplate of the Ring Doorbell, follow these steps:

1. Identify the wires: If you have an existing doorbell system, locate the wires connected to your old doorbell chime. Typically, there will be two wires – one for power and one for the doorbell chime. If you need to install new wires, refer to the installation instructions provided by Ring.

2. Prepare the wires: Strip a small portion of insulation from the end of each wire. This will expose the metal conductor, making it easier to connect to the screw terminals.

3. Connect the wires: On the backplate of the Ring Doorbell, you’ll find screw terminals labeled “trans” and “front” or “R.” Wrap the power wire around the screw labeled “trans” and the doorbell chime wire around the screw labeled “front” or “R.” Make sure the wires are securely wrapped around the screws.

4. Tighten the screws: Using a screwdriver, tighten the screws on the backplate, securing the wires in place. Ensure that the wires are tightly connected to the screw terminals to ensure a reliable connection.

5. Secure the wiring: If needed, use electrical tape to secure the wiring and prevent it from coming loose. You can also apply electrician’s putty around the screw terminals to provide additional protection from moisture.

By following these steps, you can successfully connect the wires to the screw terminals on the backplate of your Ring Doorbell. Remember to consult the installation instructions provided by Ring for any specific wiring requirements for your doorbell model.

Cover Wiring with Tape and Electrician’s Putty if Necessary

To ensure the safety and protection of the wiring for your Ring Doorbell, it is important to cover the exposed wiring with tape and electrician’s putty. This will provide insulation and create a protective seal to safeguard the wiring from moisture and other potential damage.

To start, you will need electrical tape and electrician’s putty, both of which can be found at your local hardware store. Begin by identifying any exposed wiring on the backplate of your Ring Doorbell.

Using electrical tape, wrap it around the exposed wiring, covering the entire length. Ensure that the tape adheres securely to the wiring, creating an insulated barrier. The tape will prevent any moisture or external elements from compromising the wiring.

Once the electrical tape is in place, apply a layer of electrician’s putty over it. Electrician’s putty is a pliable substance that can be molded and shaped to cover the tape and create a protective seal. Use your fingers to smoothly spread the putty over the tape, ensuring that it completely covers the exposed wiring.

The electrician’s putty will create a waterproof seal, further protecting the wiring from moisture, dust, and other potential damage. It forms a barrier that prevents any external elements from reaching the wiring.

By following these steps and covering the exposed wiring with tape and electrician’s putty, you can ensure the safety and longevity of your Ring Doorbell’s electrical connections. This extra layer of protection will give you peace of mind, knowing that your doorbell’s wiring is secured and insulated.

Step 4: Install Battery Pack and Mounting Bracket for Your Ring Doorbell

Once you have properly prepared the wiring, you can proceed with installing the battery pack and mounting bracket for your Ring doorbell. Here are the steps to follow:

1. Charging the battery: Start by charging the battery for your wireless doorbell. If your device has an internal battery, check the battery level in the Ring app. If it needs charging, connect the doorbell to a power source using the provided USB cable and adapter. Allow the battery to charge completely before proceeding.

2. Mounting bracket installation: Identify the necessary mounting bracket based on your specific Ring doorbell model. The mounting bracket enables secure installation and proper positioning of the doorbell. Determine the best location for your doorbell, considering factors such as visibility and accessibility.

3. Mounting on different surfaces: Depending on the type of surface you are mounting your Ring doorbell on, use the appropriate method. For example, if you are installing it on stucco or masonry, use a masonry bit and plastic anchors to secure the mounting bracket. If the doorbell will be mounted on wood or other suitable surfaces, you can use screws to secure the bracket.

4. Attaching the battery pack: Once the mounting bracket is securely in place, attach the battery pack to the back of the doorbell. Most Ring doorbells have a removable faceplate that allows access to the battery compartment. Gently insert the battery pack into its designated slot, ensuring it is properly aligned.

5. Testing and activation: With the battery pack attached, power on your Ring doorbell by pressing and releasing the orange button on the back. Wait for the doorbell to power up, indicated by a spinning white light. Follow the setup instructions on your mobile device or through the Ring app to connect your doorbell to your Wi-Fi network and complete the activation process.

By following these simple steps, you can successfully install the battery pack and mounting bracket for your Ring doorbell, ensuring a secure and functional video doorbell for your home.

How Do I Connect My Doorbell Camera To My Phone?

To connect your doorbell camera to your phone, you can follow these general steps:

1. Download the App: Download the Ring app on your smartphone. It is available for both iOS and Android devices.
2. Create an account: Create a new account or log in to your existing account.
3. Set up a new device: In the Ring app, tap on “Set Up a Device” and select “Doorbells” from the options.
4. Scan the QR code or MAC ID: Use your phone’s camera to scan the QR code or MAC ID located on the back of your Ring Doorbell. You can also find this code in the Quick Start Guide that came with the device. Wait for a green line or box to appear around the code before proceeding.
5. Connect your phone to the Ring Wi-Fi Network: On your phone, go to the Wi-Fi settings and connect to the Ring Wi-Fi network. This network will have a name starting with “Ring-” followed by a series of numbers.
6. Connect your Ring Doorbell to your home Wi-Fi: Follow the prompts in the app to select your home Wi-Fi network and enter the Wi-Fi password. Wait for the light on your Ring Doorbell to flash blue four times, indicating a successful connection.
7. Test the Connection: Once your Ring Doorbell is connected to Wi-Fi, you can test the connection by tapping on “Live View” in the Ring app. This will allow you to see a live video feed from your doorbell camera.

Does Ring Doorbell Need Wifi?

Yes the Ring Doorbell needs a Wi-Fi link to work correctly. The Ring Doorbell makes use of Wi-Fi to connect with your smart device, COMPUTER, tablet computer, plus various other tools.

Without a Wi-Fi link, the Ring Doorbell will certainly not have the ability to send out notices, informs, or updates and also you will certainly not have the ability to see the video clip or make use of two-way talk. 

Nevertheless there is one exemption. You can make use of a cordless hotspot to alternative to Wi-Fi plus momentarily gain access to your Ring Devices.

In this situation the Ring Doorbell will certainly still sound when a person presses the switch, along with any kind of hardwired mechanical chimes attached to the Ring will certainly remain to function customarily.

It’s essential to keep in mind that the Ring Doorbell Elite as well as the Ring Stick-up Cam Elite can run without a cordless net link however they still need accessibility to the net to execute their different features.

Can Ring Work Without Internet?

Ring buzzers as well as video cameras need a web link to work effectively. Without a web link you will certainly not have the ability to obtain protection alerts/notifications or stream live video clip together with audio feed from your Ring tool to your smart device.

You will certainly additionally not have the ability to access Ring application to manage the tool from another location. 

Nonetheless the Ring Doorbell Elite as well as the Ring Stick-up Cam Elite can run without a cordless net link yet they still call for accessibility to the net to execute their different features.

These tools make use of PoE (Power over Ethernet) so they do not need Wi-Fi. The Ethernet cable they’re gotten in touch with supplies both power coupled with net to the system. 

Since these gadgets are attached to the web with wires instead of wirelessly the links accomplished are frequently a lot more steady as well as much faster. 

Nonetheless, without the net link that the Ethernet wire link offers the Ring Elite Camera as well as buzzer can not be established neither would certainly they have the ability to work.

They still require a link to the web in order to have the ability to connect with the Ring application in addition to upload videotaped safety video clip to the cloud.

Can I Use My Phone With Ring Doorbell?

Yes, you can utilize your phone with Ring Doorbell. The Ring Doorbell functions by linking to your Wi-Fi network as well as tracking what’s occurring outdoors your door.

When a site visitor presses the buzzer switch on your Ring you get a notice on your mobile phone. You can see an online sight of your veranda coupled with can consults with visitors to provide directions or allow them understand you’re involving the door with a fast reply.

To attach your phone to your Ring Doorbell, you require to download and install the Ring application, produce an account together with established a brand-new tool.

You can after that check the QR code or MAC ID situated on the back of your Ring Doorbell and also link it to your house Wi-Fi network. 

When your Ring Doorbell is linked to Wi-Fi, you can evaluate the link by touching on “Live View” in the Ring application. This will certainly permit you to see a real-time video clip feed from your buzzer cam.

Conclusion

Now that you learned how to connect Ring Doorbell at home, please beware that you must know that different types of Ring Doorbell. Always remember to choose the best for your need and which you can afford.

But I have an extensive article stating all different types of Ring Doorbell with their Pros and Cons with their Price.