How To Stop The Smoke Detector From Chirping And Beeping -

Last updated on June 2nd, 2024 at 02:37 am

This post may contains affiliate links which means I may receive a commission from purchases made through links. Learn more from affiliate policy page.

Do you wish to know how to stop the smoke detector from chirping and beeping? Yes, Smoke detectors provide an invaluable service – they alert us to potential fires in our homes.

However, a chirping or beeping smoke detector is annoying at best, and alarming at worst.

Have you ever been jolted awake at night by the annoying chirp of a smoke detector in need of new batteries? I have, and let me tell you – it’s frustrating!

The chirp starts out barely noticeable but grows more incessant by the minute.

You find yourself stumbling around your dark house trying to find the culprit detector so you can remove the battery and restore peace and quiet.

But simply taking out the battery also takes away your fire protection, so you need to replace it soon after.

In this article, I’ll explain the common causes of smoke detector chirping and beeping and provide solutions to silence the noise for good.

Let’s dive in.

How To Stop The Smoke Detector From Chirping And Beeping: Common Causes

There are a few main reasons why your smoke detector may be chirping or beeping:

Low battery – This is the most common cause of smoke detector chirps and beeps. The chirps/beeps alert you that the battery needs to be replaced.

Dirty sensor – Dust, bugs, steam, etc. can accumulate on the smoke detector’s sensor and cause false alarms. The chirping/beeping alerts you to clean the sensor.

Malfunction – Defective smoke detectors may chirp or beep due to an internal malfunction. This often requires replacing the unit.

End of life – Most smoke detectors should be replaced every 8-10 years. Chirping/beeping at the end of the detector’s service life alerts you it’s time to install a new one.

Low Battery

The most common smoke detector issue is a low battery. Here are the signs your chirping or beeping is caused by a low battery:

The chirps/beeps come at regular 30-60 second intervals.
The smoke detector casing blinks a red LED light with each chirp/beep.
The chirps started recently, after months/years of normal operation.

Replacing the battery should stop the chirping/beeping. Refer to the battery replacement section below for instructions.

Dirty Sensor

Dust and debris accumulation can cause smoke detector false alarms and chirping. Here are the signs of a dirty sensor:

The chirps/beeps are intermittent and sporadic, not at regular intervals.
The chirps/beeps started after construction, remodeling, or other dust-generating activities.
The smoke detector frequently false alarms when cooking or showering.

Cleaning the smoke detector’s sensor should stop unwanted chirps/beeps. Refer to the clean smoke detector section below for instructions.

Malfunction

If your smoke detector is relatively new and has always chirped/beeped, even with new batteries and after cleaning, it likely has an internal malfunction.

Signs of a defective unit include:

The chirping/beeping persists after troubleshooting steps like battery and sensor cleaning.
The smoke detector has frequent false alarms not caused by cooking, steam, etc.
The smoke detector fails to alarm during obvious smoke-testing.

A malfunctioning smoke detector needs to be replaced. Check the smoke detector age and replacement sections below.

End of Life

Smoke detectors should be replaced every 8-10 years, even if they appear to be working correctly.

The National Fire Protection Association recommends replacing smoke detectors by these ages:

Ionization smoke detectors: 8-10 years
Photoelectric smoke detectors: 10 years
Combination (ionization + photoelectric) smoke detectors: 10 years

Chirping/beeping from an older smoke detector likely means it’s reached its end of service life. Refer to the smoke detector age and replacement sections below.

How to Stop Smoke Detector Chirping or Beeping

Below we cover the detailed steps to stop your smoke detector from chirping or beeping, depending on the most likely underlying cause.

Replace Smoke Detector Battery

A low battery is the most common reason for smoke detector chirping and beeping. Here is how to replace the battery:

Locate the unit making the chirping/beeping sound. Smoke detectors are typically mounted on ceilings or high on walls. The blinking red LED light will help identify which one needs a new battery.
Check the type of battery needed. Most smoke detectors use inexpensive 9V or AA batteries. The smoke detector label or manual will indicate the battery type and voltage if unsure.
Disable the battery. Look for a button or switch to disengage the battery and stop the chirping/beeping. If there’s no disable button, remove the existing battery.
Remove the smoke detector mounting bracket. Turn the smoke detector counterclockwise to detach it from the bracket. This will reveal the battery compartment.
Install the new battery. Match the battery terminal orientation as shown in the battery compartment. Insert the new battery into the smoke detector and turn it clockwise until snug.
Reattach the mounting bracket. Line up the smoke detector and bracket and turn clockwise to secure it.
Test the smoke detector. Press the test button and ensure the alarm sounds loudly. Also check that any interconnected smoke detectors alarm as well.

The chirping/beeping should stop with a fresh battery installed. If it persists, try the additional troubleshooting steps below.

How Do You Stop A Hardwired Smoke Detector From Beeping?

Locate the Reset Button:
- Find the reset button on the smoke detector.
- Press the reset button firmly.
- This may temporarily stop the beeping, but it’s not a permanent solution.
Replace the Battery (if applicable):
- Turn off the power to the smoke detector at the circuit breaker.
- Remove the smoke detector from the mounting bracket.
- Replace the old battery (usually a 9-volt battery) with a new one.
- Reinstall the smoke detector and turn the power back on.
Check the Detector’s Age:
- If replacing the battery doesn’t stop the beeping, or if the detector is more than 10 years old, it’s time to replace the entire smoke detector.
Replace the Smoke Detector (if necessary):
- Turn off the power to the old smoke detector at the circuit breaker.
- Remove the old smoke detector from the mounting bracket.
- Follow the manufacturer’s instructions to properly install the new smoke detector.
- Turn the power back on and test the new smoke detector.
Maintain the New Smoke Detector:
- Replace the batteries in the new smoke detector as recommended by the manufacturer (usually every 6-12 months).
- Test the new smoke detector regularly by pressing the test button.
- Replace the entire smoke detector every 10 years or as recommended by the manufacturer.

By following these step-by-step instructions, you can effectively stop a hardwired smoke detector from beeping and ensure that your smoke detection system is functioning properly.

Clean Smoke Detector

Dust and debris can cause unwanted smoke detector chirping and false alarms. Here’s how to clean your smoke detector:

Disable the battery. Remove the battery or press the disable button to stop the chirping/beeping.
Remove the smoke detector mounting bracket. Turn the smoke detector counterclockwise to detach it from the bracket.
Vacuum the exterior vents. Use a soft brush attachment and vacuum around the exterior vents to remove dust.
Open the sensor chamber. Many smoke detectors have a compartment that opens to access the internal sensor. Refer to the smoke detector manual for model-specific instructions.
Carefully vacuum the sensor. Use a soft brush attachment to vacuum dust off the smoke detector’s internal sensor. Avoid touching the sensor directly.
Replace the battery. Reattach the fresh battery and mounting bracket.
Test the smoke detector. Press the test button and ensure the alarm sounds loudly. Verify the chirping has ceased after cleaning.

If chirping continues after cleaning, the smoke detector likely needs to be replaced due to malfunction or age.

Inspect Smoke Detector Age

Smoke detectors should be replaced every 8-10 years. Check the smoke detector age:

The manufacture date is often printed on the back of the unit.
There may be a replace-by date on the back or inside of the detector.
Look for an expiration date on the original packaging.
Contact the manufacturer with the model number to inquire about the production year.
Check purchase records, receipts, or installation dates to approximate the age.
If the age is unknown, replace detectors over 10 years old to be safe.

If your smoke detector is over 8-10 years old, replacement is likely needed to stop chirping and ensure proper operation.

Replace Smoke Detector

When smoke detector chirping persists after troubleshooting, it likely needs to be replaced if over 8-10 years old.

Here is how to install a new smoke detector:

Disable the power. Shut off power to the smoke detector at the breaker box to avoid electrical shocks.
Remove the old unit. Rotate the smoke detector counterclockwise to detach it from the bracket. Unplug any wiring.
Install the new smoke detector. Follow the manufacturer instructions for wiring any electrical connections. Attach the new unit to the mounting bracket.
Enable the power. Restore power at the breaker box. Check that the green operation light illuminates.
Test the smoke detector. Press the test button to verify the loud alarm activates. Make sure any linked smoke detectors also alarm.

Ideally, replace smoke detectors before they reach 10 years old. Doing so will maintain protection and avoid late-night chirping emergencies.

Troubleshooting Persistent Chirping or Beeping

If replacing the battery and cleaning the smoke detector doesn’t stop the chirping or beeping, there are a few additional things to check:

Verify the correct battery type is installed. Match the voltage and size recommended in the user manual. Alkaline batteries often last longer than off-brand versions.
Check for wiring issues if it is a hardwired smoke detector. Make sure the connections are properly secured. Faulty wiring can cause chirping.
Inspect for damage. Look for any external cracks or internal debris that could cause a malfunction. A damaged smoke detector should be replaced.
Press the silence/hush button after an alarm event to stop the chirping. The button may need to be held for 10-15 seconds.
Rule out environmental factors. Cooking smoke, steam, dust, etc. can cause sporadic false alarms. Eliminate these factors before further troubleshooting.
Consult manufacturer support for model-specific help. Many brands have troubleshooting guidance and customer service to assist with persistently chirping units.

If the chirping continues after extensive troubleshooting, replacement of the smoke detector is likely required.

Preventing Smoke Detector Chirping and Beeping

While chirping smoke detectors are frustrating, there are a few tips to help avoid these nuisance alarms:

Change batteries annually. Proactively swap batteries every year even if they seem fine. Mark your calendar to prevent low battery chirps.
Vacuum smoke detectors biannually. Regularly cleaning smoke detectors prevents dust buildup that can cause false alarms and chirping.
Avoid cooking smoke. Open windows, use exhaust fans, and lower heat to prevent cooking fumes from reaching smoke detector sensors.
Take steamy showers wisely. Turn on bathroom exhaust fans and shut the bathroom door when showering to keep moisture from setting off smoke detectors.
Close doors when sanding or sawing wood. Keep dust contained in one room when doing construction or remodeling to avoid smoke detector contamination.
Replace smoke detectors every 8-10 years. Don’t wait for chirping or malfunction – proactively installing new smoke detectors maintains optimal protection.

Following these smoke detector maintenance tips will minimize nuisance chirping and keep your family safely protected.

Key Takeaways on Fixing Smoke Detector Chirping and Beeping

Here are the key troubleshooting steps:

Replace low batteries causing regular chirping every 30-60 seconds
Clean dust triggering sporadic chirping
Inspect smoke detector age and replace units over 8-10 years old
Replace persistently chirping detectors that are defective

Part 2: Installing New Smoke Detectors and Maintaining Your Smoke Alarm System

Protecting your home and family from fire requires having working smoke detectors. After stopping a chirping or beeping smoke detector, it may need to be replaced. This second part covers choosing new smoke detectors and ongoing system maintenance.

Smoke Detector Placement Guide

Installing properly placed smoke detectors greatly improves home fire safety.

Follow these placement recommendations from the National Fire Protection Association:

Bedrooms – Install smoke detectors in every bedroom. They should be mounted on the ceiling or high on the wall.

Hallways – Have smoke detectors in hallways leading to bedrooms. They should also be on every level of the home.

Living spaces – Include smoke detectors in living rooms, dens, and family rooms.

Dining rooms – Smoke detectors should cover dining spaces.

Kitchen – Install smoke detectors just outside of kitchens as fumes can cause false alarms.

Laundry rooms – Add smoke detectors outside of laundry rooms if not already covered.

Basement – Finish basements should have smoke detectors. Include them near basement stairs.

Interconnection – Where possible, interconnect smoke detectors so when one alarms, they all do. This provides the earliest warning throughout the home.

Recommended Smoke Detector Locations

Here is a recommended smoke detector locations in a home:

Location	Details
Bedrooms	On ceiling or high on wall in every bedroom
Hallways	On every floor near bedrooms
Living Spaces	In living room, family room, den
Kitchen	Just outside kitchen
Dining Room	On ceiling near dining room
Laundry Room	Outside laundry room
Basement	Near basement stairs and in finished basement
Interconnection	Where possible, wirelessly interconnect units

Use this smoke detector placement guide to optimize protection on every level and room of your home.

Choosing New Smoke Detectors

When selecting replacement smoke detectors, consider these factors:

Power source – Battery operated or hardwired units
Sensor type – Ionization, photoelectric, or dual sensor
Interconnectivity – Look for units with wireless linking capability
Listing – Ensure it meets recognized standards like UL 217
Warranty – Opt for units with at least a 10 year limited warranty
Features – Additional options like LED lights, hush button, tamper resistance

Compare models and prices from reputable brands like Kidde, First Alert, and Nest.

Purchase replacements with the same connectivity and features as your existing units when possible.

Smoke Detector Types

There are a few varieties of smoke detectors to consider:

Ionization – Best at detecting fast flaming fires. Economical models. Prone to nuisance alarms.

Photoelectric – Excel at detecting slow smoldering fires. Fewer false alarms. Typically cost more.

Dual Sensor – Combine ionization and photoelectric sensors. Provides enhanced all-around fire detection.

Dual sensor smoke detectors or combination ionization-photoelectric models provide the most comprehensive protection.

Power Options

Smoke detectors are powered by:

Batteries – Typically 9V or AA. Easier to install but require periodic battery changes.
Hardwired – Connected to home electrical system. May have battery backup. Doesn’t need batteries changed. Professional installation often required.
10-year sealed battery – Entire smoke detector is replaced when battery dies. No changing batteries.

For most homes, battery powered smoke detectors provide an economical and convenient option. But hardwired units provide unmatched reliability without needing battery swaps.

Maintaining Your Smoke Detectors

To keep your smoke detectors working properly:

Test monthly – Press the test button to verify alarms sound. Fix units that don’t respond.
Change batteries annually – Replace batteries once a year, even if not chirping. Mark calendars to remind.
Clean biannually – Vacuum smoke detector covers and sensors twice a year.
Replace every 8-10 years – Install new smoke detectors before they exceed recommended service life.
Repair damage immediately – Fix cracked or damaged units right away.
Eliminate false alarms – Stop cooking smoke, steam, dust, etc. from reaching detectors.
Hire an electrician – Have professionals install and replace hardwired smoke detectors.

Following the manufacturer’s maintenance guidelines keeps smoke detectors working properly and protects your family.

Smoke Alarm System Costs

Typical costs for smoke detector components:

Basic smoke detector: $6 – $35
Smoke detector with 10-year battery: $30 – $70
Hardwired or interconnected smoke detector: $35 – $100
Smoke detector installation: $75 – $200 per alarm
Smoke detector replacement: $100 – $400 for a full system

Prices vary based on model, features, brand, and if professional installation is needed.

Preventing Smoke Detector Chirping and False Alarms

While smoke detector chirping can be a nuisance, there are ways to prevent many unwanted alarms:

Control cooking smoke – Use exhaust fans, lower heat, and keep kitchen doors closed when cooking to minimize smoke reaching detectors.

Minimize steam – Run bathroom fans when showering and keep doors closed to reduce humidity triggering smoke detectors.

Clean regularly – Frequently vacuum smoke detectors to remove dust buildup that can cause chirping.

Avoid construction debris – Close doors and use tarps when remodeling to prevent sawdust and debris from contaminating smoke detectors.

Install properly – Follow manufacturer guidelines on where to correctly position smoke detectors to prevent nuisance alarms.

Replace timely – Smoke detectors over 10 years old are prone to chirping and false alarms. Install new units before they exceed their service life.

Use duct detectors – HVAC duct smoke detectors only alarm when smoke is present in ventilation systems, reducing false alarms.

Consider HVAC control – Some smart smoke detectors can automatically shut down HVAC systems when alarming to prevent spreading smoke.

Interconnect detectors – Networked smart smoke detectors can be programmed with customized sensitivities to reduce nuisance chirping and alarms.

Following fire safety best practices keeps smoke detectors working properly and family members protected.

Smart Smoke Detectors

Smart smoke detectors have innovative features like:

App monitoring and controls
Remote alarming
Automatic HVAC shutoff
Customized sensitivities
Voice alarms
Real-time air quality alerts

Leading brands of smart smoke detectors include:

Nest Protect
Kidde Worry-Free
First Alert Onelink
Roost Smart Battery

While smart smoke detectors cost more upfront, they provide added monitoring, customization, and prevention of false alarms.

The convenience and connectivity make them worth considering, especially for large homes.

Final Smoke Detector Tips

If chirping persists after troubleshooting, replace smoke detectors over 10 years old.
Interconnected units provide the earliest whole-home alarm when one detects smoke.
Avoid painting smoke detectors as it can affect their sensitivity.
Smoke detectors expire! Write the expiration date on new units as a reminder to replace.
Vacuuming smoke detectors prevents dust buildup that can cause chirping or false alarms.
Prevent cooking smoke from reaching smoke detectors to minimize nuisance alarms.
Testing smoke detectors monthly verifies batteries and alarm function.
Replace smoke detectors immediately if physically damaged or cracked.
Modern smoke detectors are highly effective at saving lives when working properly.

Staying on top of smoke detector maintenance provides peace of mind your family has vital fire protection.

FAQs

How To Stop Smoke Detector From Chirping Without Battery

If your hardwired smoke detector is chirping, even with no battery installed, there are a few steps to take on how to stop smoke detector from chirping without battery

Check for wiring issues – Faulty wiring connections can cause chirping in hardwired units. Inspect wires for damage, loose connections, shorts, etc.
Clean the smoke detector – Dust and debris on the sensor can sometimes cause chirping. Carefully vacuum the unit.
Press the hush button – Hardwired units often have “hush” buttons to temporarily silence nuisance chirping. Press and hold this button.
Disable power – Shut off power to the smoke detector at the circuit breaker. Then restore power after 30 seconds which may reset the unit.
Replace the unit – If chirping persists with no battery, the smoke detector likely has an internal malfunction and needs replacement.

Hardwired smoke detectors can develop internal issues over time that cause chirping.

If there are no wiring problems, cleaning and hush button attempts don’t work, replacement is often the solution.

How Do I Silence My Smoke Detector?

To silence a chirping smoke detector:

Press the “Hush” button – Smoke detectors have “Hush” or “Silence” buttons to temporarily quiet nuisance alarms. Press and hold this button for several seconds which typically silences it for a few minutes.
Disable the battery – Remove the battery from a battery-powered unit. This will silence it but also disable protection, so replace or reactivate the battery soon.
Turn off power – For hardwired detectors, turn off power at the breaker. Again re-enable power promptly after silencing.
Remove battery and press test button – Another option is to remove the battery and press the test button for 15-30 seconds.
Replace battery – Inserting a fresh replacement battery will stop the chirping in many cases.

Note smoke detectors should only be disabled temporarily to locate and silence a nuisance chirping unit.

Restore batteries and power promptly to maintain fire protection.

Can You Silence A Smoke Detector From Beeping?

Yes, most smoke detectors have methods to silence them from beeping, including:

Pressing the “Hush” button – This briefly silences the alarm, usually for 5-15 minutes. It can quiet nuisance beeps and chirps.
Disconnecting battery power – Removing the battery will silence battery-operated smoke detectors.
Turning off electric power – Shutting off power via the circuit breaker silences hardwired smoke detectors.
Pressing test button – After removing the battery, long pressing the test button for 15-30 seconds may override beeping.
Replacing batteries – Installing fresh batteries can stop beeping caused by low batteries.

Keep in mind smoke detectors should only be disabled temporarily to locate a nuisance beeping detector.

Restore power and batteries promptly afterwards to maintain fire protection.

Why Does My Smoke Detector Make A Continuous Beep Sound?

A continuous beeping sound from a smoke detector usually indicates:

Low battery – The most common cause of ongoing beeps is a low battery. Replace it with a fresh battery.
Malfunction – Defective smoke detectors can beep continuously. They require replacement if beeps persist after troubleshooting.
False alarm – Cooking smoke, steam, dust, etc. may trigger the alarm sensor. Eliminate these factors first.
Disconnection – Loose wiring in hardwired units can cause beeping. Check electrical connections.
Sensor contamination – Heavy dust or insect accumulation on sensors can lead to beeping. Clean detectors.
End of life – Smoke detectors over 8-10 years old reaching their lifespan often beep continuously, signalling replacement is needed.
Hush button not pressed – After an alarm, press the detector’s hush button to cease beeping. Hold for 10+ seconds.

If smoke detector beeping won’t stop, replacing batteries, cleaning sensors, and pressing the hush button are the first steps. But continuous beeps may require replacing malfunctioning or elderly units.

What Does A Chirping Smoke Detector Mean?

The common causes of a chirping smoke detector include:

Low battery – Intermittent chirping every 30-60 seconds often signals low battery power. Replacing the battery typically ends the chirps.
Sensor dirt – Dust, insects, steam, and debris can cause sporadic chirping as they interfere with the sensor. Cleaning the detector fixes these issues.
Malfunction – Internal defects can lead to persistent chirping. Defective units need to be replaced if chirping continues after troubleshooting.
End of life – Chirping from an aging smoke detector over 8-10 years old indicates it should be replaced.
False alarm – Environmental factors like cooking smoke occasionally cause temporary chirping from false alarms.
Disconnection – Loose wiring can make hardwired detectors chirp. Check electrical connections.

Chirping signals require attention, but is typically resolved by cleaning sensors, changing batteries, or replacing defective or outdated units over 10 years old.

Do Smoke Detectors Still Beep Without Batteries?

Most battery-only operated smoke detectors will not beep when batteries are removed.

However, some scenarios where they may still beep without batteries include:

Hardwired with battery backup – Removing the battery in a hardwired smoke detector may not silence it, as it draws power from electrical wiring.
Malfunction – Defective detectors can beep continuously even without batteries installed. Internal issues may cause this.
Residual power – Momentary beeps may occur immediately after the battery is disconnected before power is fully depleted.
Interconnected – If interconnected to other smoke detectors, disabling one unit will not prevent the others from alarming.
Hush button not pressed – The beeping may persist if the detector’s hush button isn’t pressed to fully silence the alarm.

So most battery-only smoke detectors will stop beeping when batteries are removed.

But defective models, briefly, when interconnected, or if hardwired with backup batteries may still beep briefly.

Can I Remove The Battery From My Smoke Alarm?

It’s not recommended, but you can briefly remove the battery from a smoke alarm in these scenarios:

To silence nuisance chirping or beeping – Temporarily detach the battery to stop the noise so the source can be located.
During construction – Remove batteries to prevent false alarms from dust and debris.
Cleaning the unit – Disabling batteries avoids accidental alarms when opening detectors to clean them.
Locating source of alarm – Detach batteries in one area at a time to detect which smoke detector is malfunctioning.
Testing functionality – Removing the battery tests if the detector works without battery backup.

However, smoke detectors should only have batteries disabled temporarily. As soon as the task is complete, reinsert batteries immediately to reactivate fire protection.

How Long Does The Hush Button On A Smoke Detector?

When pressed, the hush button on a smoke detector typically silences the alarm for:

5-15 minutes – This allows time to clear smoke from a false alarm, replace batteries, or troubleshoot the issue.
1-3 hours – Some detectors have extended silence periods, but still limit temporary disabling to prevent fire risks.
Until smoke clears – More advanced units silence until smoke is fully cleared from the sensor.
Indefinitely – A defective detector may not resume alarm properly after the hush button is pressed. This malfunction requires replacement.

So smoke detector hush buttons provide temporary silence for 5 minutes to 3 hours normally.

Quickly resolve any underlying issues triggering the alarm during this brief window of time before protection is reactivated.

Smoke Detector Chirping or Beeping FAQs

Below are answers to some frequently asked questions about fixing smoke detector chirps and beeps:

Why Does My Smoke Detector Keep Chirping Every 30-60 Seconds?

The most common cause of periodic smoke detector chirping is a low battery. Replace the battery with a fresh one to stop regular chirping.

Why Does My Smoke Detector Chirp Randomly or Sporadically?

Intermittent chirping is typically caused by dust or steam triggering the sensor. Clean the smoke detector to resolve sporadic chirping.

Why Does My New Smoke Detector Keep Chirping?

If a recently installed smoke detector persistently chirps, it likely has a defect. Replace new chirping units under the manufacturer’s warranty.

Can I Stop The Chirping At Night?

You can temporarily silence the chirping by pressing the smoke detector’s hush button or removing the battery. However, this disables protection, so replace the battery or unit.

Will My Smoke Detector Chirp If Interconnected With Others?

Only the unit with the issue will chirp. However, when one interconnected smoke detector alarms, they all sound.

What If Chirping Persists After Replacing Battery?

If replacing the battery doesn’t work, clean the smoke detector and check its age. Units over 10 years old that still chirp after troubleshooting likely need replacement.

Conclusion

The chirping of a smoke detector is hard to ignore, but fixing the problem is usually pretty straightforward.

Just remember the most likely causes – low battery, dirty sensor, or an aging device – and the key solutions like changing batteries, cleaning the detector, or installing a replacement.

While disabling smoke detectors temporarily quiets chirping, do so cautiously and only after identifying which unit needs attention.

With the proper maintenance, your smoke alarms will keep working around the clock to protect your family without annoying false alarms.