How To Take Faceplate Off Ring Doorbell Pro – A Friendly Step-by-Step Guide

How to take faceplate off ring doorbell pro? I struggled with this at first when I wanted to replace my doorbell’s faceplate to match our new front door color.

I tugged and pulled but couldn’t get it off, worrying the whole time I’d break the plastic tabs. Then I discovered a simple, stress-free way.

Removing the faceplate on a Ring doorbell pro can seem intimidating at first, but it’s actually a pretty straightforward process once you know what to do.

In this easy-to-follow guide, I’ll walk you through how to safely pop off the faceplate on your Ring Doorbell Pro in just a few simple steps using common household tools.

Here we go.

Why Would You Want to Remove the Faceplate?

Here are some of the most common reasons people remove the faceplate on their Ring doorbell pro:

• To change the color or material of the faceplate to match your home’s exterior
• To clean behind or around the edges of the faceplate if dirt/debris accumulates
• To replace a damaged or cracked faceplate
• To apply a custom skin or decal to the faceplate

No matter what your motivation, removing the front cover of your Ring Doorbell Pro is a breeze as long as you follow these steps.

Steps by Steps Guide on How To Take Faceplate Off Ring Doorbell Pro

Here’s a key steps to easily remove the faceplate on your Ring Doorbell Pro:

1. Power off the doorbell
2. Unscrew the security screw
3. Insert a prying tool to release the plastic tabs
4. Gently remove the faceplate
5. Clean and inspect the doorbell
6. Install a new or customized faceplate
7. Reattach the original faceplate
8. Reinstall the security screw
9. Power on and test the doorbell

Take your time, follow the instructions closely, and avoid forcing anything. With a little care and patience, you’ll be able to remove and replace the front cover on your Ring Doorbell Pro without any issues.

What You’ll Need

Removing the faceplate on a Ring doorbell pro requires just a few basic tools:

• The Ring-provided security screwdriver (or a T15 Torx screwdriver)
• A plastic prying tool (an old gift card or credit card works too)
• A soft, dry microfiber cloth

That’s it! With just those three things, you’ll be able to safely pop off the faceplate and access the inside of your Ring Doorbell Pro.

Step 1: Power Off the Doorbell

The first thing you’ll want to do is power off your Ring Doorbell Pro. This ensures the doorbell won’t accidentally start recording or send alerts while you’re working on removing the faceplate.

To power off your Ring Doorbell Pro:

1. Locate the Setup button on the side of the doorbell. This small circular button has a power icon next to it.
2. Press and hold the Setup button for 5 seconds until the lights on the Ring turn off.

Once the lights are off, your Ring Doorbell Pro is safely powered down and ready for you to remove the faceplate.

Step 2: Locate and Unscrew the Faceplate Screw

With your doorbell powered down, it’s time to remove the single security screw that holds the faceplate in place.

1. Examine the bottom edge of the Ring Doorbell Pro faceplate. You should see a tiny star-shaped (Torx T15) security screw in the center.
2. Using the provided security screwdriver, insert the tip into the screw and turn counter-clockwise to loosen. Keep turning until the screw is completely removed.
3. Set the security screw aside in a safe place so you don’t lose it. You’ll need to reinstall it later to reattach the faceplate.

Step 3: Insert Your Prying Tool and Pop Off the Faceplate

This is the most delicate part of removing the Ring Doorbell Pro faceplate. You’ll want to take care not to damage the plastic tabs that hold the cover in place.

1. Take your plastic prying tool and gently insert it between the bottom edge of the faceplate and the doorbell housing.
2. Slowly move the prying tool around the perimeter of the faceplate, releasing the plastic retention tabs. Apply light pressure as you go.
3. Once you’ve gone around the entire edge, the faceplate should pop off easily. Remove it carefully.

Pro Tip: Go slow and apply firm but gentle pressure with the prying tool. If you try to force the faceplate off, you could break the plastic tabs and have trouble reattaching it later.

Patience is key!

Step 4: Clean and Inspect the Doorbell

With the faceplate removed, now is a good time to give your Ring Doorbell Pro a quick cleaning.

• Use a dry microfiber cloth to wipe away any dirt, dust, or grime that has accumulated on the front or around the edges of the doorbell.
• Pay close attention to the camera lens area and make sure no debris is obstructing the camera’s field of view.
• Visually inspect the doorbell housing, wires, and connectors to make sure everything is intact. Look for any cracks, damage, or loose parts.
• If necessary, use a soft bristle brush and compressed air to dislodge any debris stuck in small crevices.

Once you’ve given it a good clean, your Ring Doorbell Pro will look as good as new!

Step 5: Replace or Customize the Faceplate

If your goal was to swap out the stock faceplate for a new color or material, now is the time to do it!

Carefully remove the existing faceplate and replace it with your new custom faceplate, aligning the holes and plastic tabs properly.

Make sure the new faceplate clicks securely into place all the way around the perimeter.

Alternatively, you could apply a custom vinyl decal or skin to the existing faceplate at this point if you want a new look without buying a replacement.

Get creative and customize it to match your home!

Step 6: Reattach the Faceplate

You’re almost done! The last step is to reattach the faceplate to your Ring Doorbell Pro.

1. Align the faceplate so all the plastic tabs line up with the edge of the doorbell housing.
2. Starting at one side, gently press the faceplate onto the doorbell. It should click into place as the retention tabs engage.
3. Work your way around the entire perimeter, pressing firmly but gently until the faceplate is fully reattached.
4. If the faceplate feels loose, remove it and repeat the installation, pressing harder to ensure the tabs are fully engaged.

Step 7: Reinstall the Security Screw

To securely fasten the Ring Doorbell Pro faceplate, you’ll need to reinstall the security screw:

1. Insert the screw into the hole at the bottom of the faceplate and turn clockwise to tighten.
2. Use the security screwdriver to tighten the screw until it’s snug. Don’t overtighten or you could strip the screw hole.
3. Make sure the screw is fully flush with the faceplate for a seamless look.

Step 8: Power On the Doorbell and Test

The final step is powering your Ring Doorbell Pro back on and testing to make sure everything is working properly:

1. Press and hold the Setup button for 5 seconds until the lights turn on.
2. Open the Ring app and check that your doorbell is connected and responsive.
3. Test the buttons, camera, microphone, motion sensor, and speakers to verify full functionality.

If you encounter any issues with operation after reattaching the faceplate, carefully remove it and re-inspect the doorbell before trying again.

And that’s it! By following these simple steps, you can safely remove and replace the faceplate on your Ring Doorbell Pro.

Customizing the look of your doorbell is a quick and easy DIY project.

Tips for Avoiding Damage

Here are a few important tips to keep in mind during the faceplate removal process:

• Always power off the doorbell before attempting to remove the faceplate
• Use a plastic prying tool rather than a metal tool to avoid scratching
• Take your time and don’t force the faceplate – the tabs break easily
• Don’t press too hard when reattaching the faceplate
• Make sure the faceplate is properly aligned before pressing into place
• Only tighten the security screw until it’s snug – don’t overtighten

Troubleshooting Common Issues

Having trouble getting that pesky faceplate off your Ring Doorbell Pro? Here are some quick fixes for common issues that may come up:

Can’t find the security screw: Carefully examine around the entire bottom edge of the faceplate for the small star-shaped screw. It blends in well with the white plastic.

Screw won’t budge: Try applying firm downward pressure while turning the screwdriver to “break” the initial resistance. Stripped or stubborn screws may need to be extracted with pliers.

Faceplate feels stuck: Heat can help release the adhesive. Use a hairdryer or heat gun around the edges, then try the prying tool again. Don’t overheat the doorbell.

Plastic tabs won’t release: Take your time and slowly move the prying tool around the perimeter, applying steady pressure. Don’t force it. If tabs break, the faceplate won’t seat properly when reattached.

Faceplate is loose after reinstalling: Remove the faceplate and check for any broken tabs.

Also make sure it’s properly aligned before pressing into place. Try tightening the screw a little more to ensure a snug fit.

Hopefully these troubleshooting tips will help you overcome any issues that arise while removing or reinstalling the Ring Doorbell Pro faceplate.

Just remember to be patient, gentle, and deliberate in your movements.

Frequently Asked Questions

Still have some questions about removing the faceplate on your Ring Doorbell Pro? Here are answers to some frequently asked questions:

What Kind Of Tool Do I Need To Remove The Faceplate?

You need a small cross-head or star-shaped screwdriver (T15 Torx) to unscrew the security screw. Ring provides this screwdriver in the box.

An old gift card or credit card works well as a prying tool. Avoid metal tools that could scratch the Ring.

Do I Need To Take Off The Whole Doorbell Or Just The Faceplate?

You only need to remove the detachable faceplate cover on the front. The main doorbell unit remains installed on the wall.

How Do I Avoid Cracking The Faceplate When Removing It?

Go slow and don’t force it. Apply firm but gentle pressure with your prying tool around the perimeter to release the plastic retention tabs.

Avoid prying from the middle or near the screw hole.

Can I Change The Faceplate Color?

Yes, customizable and replacement faceplates in various colors and materials are available from Ring. You can easily swap in a new faceplate for a brand new look.

What’s The Best Way To Clean Behind The Faceplate?

Use a dry microfiber cloth and soft brush to gently wipe away dust and debris around the lens, buttons, and edges.

Avoid liquid cleaners or abrasive materials. Be very gentle around any exposed wires or contacts.

How Do I Get The Faceplate On Straight?

Carefully align the faceplate so the plastic tabs line up perfectly with the edge of the doorbell housing before pressing into place. Take your time and adjust the positioning if needed.

Conclusion

Removing the Ring Doorbell Pro faceplate doesn’t have to be a struggle. The key is using the right tools, taking your time, and applying gentle, even pressure.

Avoid metal prying tools, power down the unit, and loosen the security screw first. Work slowly around the perimeter with a plastic card to release the tabs.

Finally, realign and reattach the faceplate before testing the doorbell. Following these simple steps will allow you to safely detach and customize your Ring Doorbell Pro faceplate without damage.

Give it a try and breathe new life into your doorbell!